Ball Sockets & End Fittings
The thread on Ball End Fittings made from 316 grade stainless steel are available in both 1/4-28 and 5/16-24 thread configurations. Both options are designed to be used in conjunction with the Threaded Termination Studs and Threaded Termination Stud Turnbuckle Assemblies as well as our Surface and Back Mounting Ball and Socket System.
The Surface and Back Mounting Ball Sockets made from 316 grade stainless steel are for use with our Ball End Fittings allowing for a variety of uses including cable rails, decorative hangings, and floral items. Additionally, these fittings offer the ability to easily attach and detach the cable for temporary displays.
Ball End Fittings
| Thread Size | Outside Dia. | Part # |
| 1/4-28 UNF RH | 5/8" | BALL6 |
| 5/16-24 UNF RH | 5/8" | BALL8 |
Flush Mount Ball Mounting Socket
| Ball Diameter |
Thick | Post Hole Dia. |
Cap Thickness |
Cap Dia. |
Pivot Angle |
Slot Y/N |
Slot Width |
Part # |
| 5/8" | 9/32" | 3/4" | 3/16" | 7/8" | 40º | No | - | BCM6 |
| 5/8" | 9/32" | 3/4" | 3/16" | 7/8" | 40º | Yes | 1/4" | BCM6-C |
Surface Mount Ball Mounting Socket
| Ball Diameter |
Outside Dia. |
Thick | Length | Mount Screw Size |
Pivot Angle |
Part # |
| 5/8" | 7/8" | 1.0" | 13/16" | 1/4" | 40º | BCFM6-C |
| 5/8" | 7/8" | 1.0" | 13/16" | 6mm x 1.25 Thread | 40º | BCFM6 |
Call Toll Free (800) 346-4296