HAYN LINES STAINLESS STEEL CABLE SYSTEMS by Hayn Enterprises

Washers and Nuts

For use with the Threaded Termination Stud and Threaded Stud Systems

Dome NutDome Nuts

Dome Nuts made from 316 grade stainless steel are available in 1/4-28 and 5/16-24 thread configurations complementing the Threaded Termination Stud system for up to 1/4" wire. The Dome Nuts serve as a cap on the Termination Stud hardware as an attachment point on the end verticals/posts.

Dome Nut, Through Hole
Thread Size Outside Dia. Thickness Part # Old Part #
1/4-28 UNF RH 9/16" 1/4" DN6 DOME6
5/16-24 UNF RH 3/4" 9/32" DN8
Dome Nut, No Through Hole
1/4-28 UNF RH 9/16" 1/4" DN6S
5/16-24 UNF RH 3/4" 9/32" DN8S

Hex Nut

Hex Nuts made from 18-8 grade stainless steel in sizes ranging from #10 - 1.0" diameter in right and left hand UNF thread.

Stainless Cap (Acorn) Nut

Hex Cap Nuts made from 18-8 grade stainless steel in sizes ranging from 1/4" thru 1/2" UNF threads.

Hex Nut

Stainless Cap (Acorn) Nut
Thread Size Part #
10-32 UNF LH 10LNL
10-32 UNF RH 10LNR
1/4-28 UNF LH 14LNL
1/4-28 UNF RH 14LNR
5/16-24 UNF LH 516LNL
5/16-24 UNF RH 516LNR
3/8-24 UNF LH 38LNL
3/8-24 UNF RH 38LNR
1/2-20 UNF LH 12LNL
1/2-20 UNF RH 12LNR
5/8-18 UNF LH 58LNL
5/8-18 UNF RH 58LNR
3/4-16 UNF LH 34LNL
3/4-16 UNF RH 34LNR
7/8-14 UNF LH 78LNL
7/8-14 UNF RH 78LNR
1.0-12 UNF LH 1LNL
1.0-12 UNF RH 1LNR
Thread Size Part # Old Part #
1/4-28 UNF RH 14CAP CAP6
5/16-24 UNF RH 516CAP CAP8
3/8-24 UNF RH 38CAP CAP10
1/2-20 UNF RH 12CAP

Washer - FlatFlat Washer

Washer - LockLock Washer

Washer - FenderFender Washer
Nominal Size Part #
3/16" 10WAS
1/4" 14WAS
5/16" 516WAS
3/8" 38WAS
1/2" 12WAS
5/8" 58WAS
3/4" 34WAS
7/8" 78WAS
1.0" 1WAS
Nominal Size Part #
1/4" 14WASL
5/16" 516WASL
3/8" 38WASL
1/2" 12WASL
Nominal Size Part#
1/4" 14FWAS
5/16" 516FWAS
3/8" 38FWAS
1/2" 12FWAS