Intermediate Tensioner Turnbuckles
These turnbuckles are applied in longer cable runs with spacing approximately 30'-40' ensuring that proper tensioning of a cable assembly can be achieved due to cable stretch. Additionally, these assemblies are used to achieve a certain desired look in shorter cable runs. Based on the look desired, positioning of the turnbuckles is the designer's choice. These fittings are fully compatible with any of our termination style fittings. All hardware is made from high quality 316 grade stainless steel for superior corrosion resistance.
Intermediate Tensioner Turnbuckle Assembly – Concealed Thread Design
| Machine Swage | ||||
| Cable Size (c) | Thread Size | Open L | Closed L | Part # |
| 1/8” | 1⁄4-28 | 4.550” | 3.050” | 14TTB18SS |
| 3mm | 1⁄4-28 | 4.550” | 3.050” | 14TTBM03SS |
| 5/32” | 1⁄4-28 | 4.800” | 3.300” | 14TTB532SS |
| 5/32” | 5/16-24 | 4.800” | 3.300” | 516TTB532SS |
| 4mm | 1⁄4-28 | 4.800” | 3.300” | 14TTBM04SS |
| 4mm | 5/16-24 | 4.800” | 3.300” | 516TTBM04SS |
| 3/16” | 1⁄4-28 | 4.750” | 3.250” | 14TTB316SS |
| 3/16” | 5/16-24 | 4.750” | 3.250” | 516TTB316SS |
| 5mm | 1⁄4-28 | 4.750” | 3.250” | 14TTBM05SS |
| 5mm | 5/16-24 | 4.750” | 3.250” | 516TTBM05SS |
| 1⁄4” | 5/16-24 | 4.800” | 3.300” | 516TTB14SS |
| 6mm | 5/16-24 | 4.800” | 3.300” | 516TTBM06SS |
| Hayn Grip | ||||
| 1/8” | 1⁄4-28 | 5.500” | 4.000” | 14TTB18HGHG |
| 3mm | 1⁄4-28 | 5.500” | 4.000” | 14TTBM03HGHG |
| 5/32” | 5/16-24 | 5.500” | 4.000” | 516TTB532HGHG |
| 4mm | 5/16-24 | 5.500” | 4.000” | 516TTBM04HGHG |
| 3/16” | 5/16-24 | 5.500” | 4.000” | 516TTB316HGHG |
| 5mm | 5/16-24 | 5.500” | 4.000” | 516TTBM05HGHG |
Tensioner Fork Assembly
| Machine Swage | ||||
| Cable Size | Thread Size | Fully Open L* | Fully Closed L* | Part # |
| 1/8” | 1⁄4-28 | 3.750 | 3.000 | 14TFA18SLH |
| 1/8” | 1⁄4-28 | 3.750 | 3.000 | 14TFA18SRH |
| 3mm | 1⁄4-28 | 3.750 | 3.000 | 14TFAM03SLH |
| 3mm | 1⁄4-28 | 3.750 | 3.000 | 14TFAM03SRH |
| 5/32” | 1⁄4-28 | 3.625 | 2.875 | 14TFA532SLH |
| 5/32” | 1⁄4-28 | 3.625 | 2.875 | 14TFA532SRH |
| 4mm | 1⁄4-28 | 3.625 | 2.875 | 14TFAM04SLH |
| 4mm | 1⁄4-28 | 3.625 | 2.875 | 14TFAM04SRH |
| 3/16” | 1⁄4-28 | 3.625 | 2.875 | 14TFA316SLH |
| 3/16” | 1⁄4-28 | 3.625 | 2.875 | 14TFA316SRH |
| 5mm | 1⁄4-28 | 3.625 | 2.875 | 14TFAM05SLH |
| 5mm | 1⁄4-28 | 3.625 | 2.875 | 14TFAM05SRH |
| 1⁄4” | 5/16-24 | 3.750 | 3.000 | 516TFA14SLH |
| 1⁄4” | 5/16-24 | 3.750 | 3.000 | 516TFA14SRH |
| 6mm | 5/16-24 | 3.750 | 3.000 | 516TFAM06SLH |
| 6mm | 5/16-24 | 3.750 | 3.000 | 516TFAM06SRH |
|
||||
*Centerline of Fork Screw to Swage Line